EM34-3 Operation with the EM34 Program

 

Learn how to use the EM34

data logger program in the TK6000 Field Computer in conjunction with the EM34-3 instrumentation to conduct a ground resistivity survey. The EM34-4 has three intercoil spacings, 10m, 20m, and 40 m to provide a variable depth of exploration with a maximum depths of 60 meters or 196 feet. The EM34-4 is often used by geologists, geophysicists, and hydrologists to map deep groundwater contaminant plumes or for exploration of potable groundwater sources in fractured and faulted bedrock.

EM34-3

EM34-3

 

Within this course are step by step guides to each EM34 data logger menu. Learn how to set up a survey to conduct a ground conductivity survey. Data Logger Program menus include Survey Setup Menu, Logger Setup Menu, Set GPS Port Menu, Display Options Menu, Monitor /Log Menu, and View Files Menu.

Instructions concerning the DAT34W program are also available. The DAT34W program is a computer program for post-processing in the office or at the home computer that allows the user to view, convert, and interpret EM34-3 files. Learn how to install the DAT34W program, transfer files from the field computer, and convert them into the proper file format for interpretation. More DAT34W lessons will continue to be added to this course.

Note: EM34-4 Assembly can be found in the Geonics Equipment Assembly Course.  This assembly lesson also contains initial set-up checks and instrument nulling to help the user get started.

Lessons:

em34 program

Starting the EM34 Program

Access the EM34 program on the TK6000. 1. Begin by finding and pushing the On/Off Button in the lower, right-hand ...
Read More
EM34 Periodic Daily Checks

EM34 Periodic Daily Checks

It is important to perform EM34 Periodic Daily Checks to maintain accurate, consistent readings. Nulling - Daily Nulling should be ...
Read More
EM34 survey

EM34 Survey Setup Menu

Configure the EM34 Survey Setup Menu on the TK6000. 1. Using the stylus, select the EM34 Survey Setup Menu. Picture ...
Read More
EM34 data logger

EM34 Data Logger Setup Menu

Configure the EM34 Data Logger Setup Menu. 1. Using the stylus, select the Logger Setup Menu. Picture of EM34 Main ...
Read More
EM34 GPS Input

EM34 GPS Menu

Configure the EM34 GPS with the Set GPS Port Menu. 1. Using the stylus, select the EM34 Set GPS Port ...
Read More
EM34 Display Components

EM34 Display Options Menu

Configure the EM34 Display Options Menu on the Allegro. 1. Using the stylus, select the EM34 Display Options Menu. Picture ...
Read More
EM34 Create Files

EM34 Monitor / Log Menu

1. Turn on the EM34. Perform EM34 Periodic Daily Checks as needed. Set up the survey using the prior menus ...
Read More
EM34 View Files Survey Display

EM34 View Files Menu

Configure the EM34 View Files Menu on the TK6000. 1. Using the stylus, select the EM34 View Files Menu. The ...
Read More
TK6000 with Flash-Drive

EM34 Files Transfer

Learn how to transfer EM34 files to a computer from a TK6000 using a USB Flash Drive. 1. Plug a ...
Read More
DAT34 Program Download

DAT34 Installation

Install the DAT34 program on a computer to look at survey results. 1.If the DAT34 program is not already installed ...
Read More
EM34 Shortcut

DAT34 File Opening

To open files collected on the EM34 in the DAT34 file program, a file must be converted from the EM34 ...
Read More
Comments are closed.

GeonicsTraining.com