EM38-MK2 Display Options Menu

Configure the EM38-MK2 Display Options Menu on the TK6000.

1. Using the stylus, select the EM31-MK2 Display Options Menu.

EM38-MK2 Display

EM38-MK2 Display Options

2. Begin by checking or unchecking each component, dipole mode, and coil separation profile.

If a component, mode, or profile is unchecked, its data will not be displayed on the data graph. Despite what components, modes or profiles are selected for display, data will be displayed in the numeric form.

EM38-MK2 Display

Display Options

3. Pick a color by clicking the component’s, mode’s, or profile’s corresponding Color Menu.

After clicking the Color Menu, select a color from the color palette.

EM38-MK2 Display

EM38-MK2 Color Palette

4. Determine a pixel thickness by clicking the component’s, mode’s, or profile’s corresponding Pixel Thickness Menu.

Choices include 1, 2, 3, or 4 pixels.

EM38-MK2 Display Pixel Thickness

EM38-MK2 Pixel Thickness

4. Select a component scale with the Display Grid for: Dropbar Menu.

Both components share the same display, yet they each have their own scale. This option allows the user to display grid lines for a particular component scale. The upper and lower grey grid lines will contain corresponding maximum and minimum values for the component selected.

EM38-MK2 Display

EM38-MK2 Display Grid for:

5. After changing the EM38-MK2 Survey Setup Menu options, it is important to save.

Press the OK Button to save. After pressing the OK Button, it is safe to push the X Button to exit. If the user exits without pushing the OK Button, the changes will not be saved.