EM31-MK2 Display Options Menu on Archer

Configure the EM31-MK2 Display Options Menu on the Archer.

1. Using the stylus, select the EM31-MK2 Display Options Menu.

Geonics LTD EM31 Program for Archer

EM31 Program for Archer

2. Begin by checking or unchecking each component and dipole mode.

Geonis LTD EM31 Display Options

Select EM31 Display Options

If a component or dipole mode is unchecked, its data will not be displayed on the data graph. Despite what components and dipole modes are selected for display, data will be displayed in the numeric form.

3. Pick a color by clicking the component’s and/or dipole’s corresponding Color Menu.

Geonics LTD EM31 Display Options Color

EM31 Display Options Color

After clicking the Color Menu, select a color from the color palette.

4. Determine a pixel thickness by clicking the component’s or dipole’s corresponding Pixel Thickness Menu.

Geonics LTD EM31 Display Options Thickness

EM31 Display Options Thickness

Choices include 1, 2, 3, or 4 pixels.

4. Select a component scale with the Display Grid for: Dropbar Menu.

Geoncis LTD EM31 Display Options Display Data

EM31 Display Options Display Data

Both components share the same display, yet they each have their own scale. This option allows the user to display grid lines for a particular component scale. The upper and lower grey grid lines will contain corresponding maximum and minimum values for the component selected.

5. After changing the EM31-MK2 Display Options, it is important to save.

Press the OK Button to save. After pressing the OK Button, it is safe to push the X Button to exit. If the user exits without pushing the OK Button, the changes will not be saved.